|
阿尔斯通（武汉）工程技术有限公司
作者：
发布时间：2008-6-20
招聘职位: 1. 电厂设计－锅炉产品工程师－电厂业务The Product Engineer Boilers 2.电厂设计－项目工程经理－电厂业务Project Engineering Manager 3.电厂设计－工艺工程师－电厂业务Process Engineer 4.电厂设计－初级工艺工程师－电厂业务Junior Process Engineer 6.采购－大宗商品采购经理－电厂业务Regional Commodity Manager 7.采购－电厂业务供应商质量监查－电厂业务Quality Inspector 8.电厂设计－系统布局工程师－电厂业务Product Engineer Building Service 9.电厂设计－投标经理－电厂业务Tendering Engineering Manager 10.电厂设计－产品工程师，阀门方向－电厂业务Product Engineer Special Valve 11.电厂设计－电厂布局工程师－电厂业务Arrangement Designer 12.电厂设计－管道工程师－电厂业务Piping Engineer 13.设计－工程技术部经理－电厂业务Head of Engineering 14.电厂设计－产品工程师，辅助设备－电厂业务Product Engineer Auxiliary Equipment 15.电厂设计－产品工程师，给水、暖通方向－电厂业务Product Engineer Feedwater Heating Plant 16.财务－项目控制－电厂业务Local Project Controller 17.电厂设计－项目合同经理－电厂业务Project Contract Manager 18.电厂设计－变压器工程师－电厂业务Transformer Specialist 19.电厂设计－分散控制系统－电厂业务Distribution Control System 职位描述: 1. 电厂设计－锅炉产品工程师－电厂业务The Product Engineer Boilers The Product Engineer Boilers has the responsibility for the technical management of the boiler and auxiliary systems subcontracted by Plants for their contracts, which can include equipment such as HRSGs (fired and unfired), package boilers, FD fans, pumps ,feedwater tanks, dampers etc. Responsibilities: n These equipments will be purchased from companies specialised in these fields of service. The technical management comprises preparation of the technical specification for the equipment review and analysis of bids, finalisation with the supplier of the technical contract. n On placement of the order, supplier follow-up including co-ordination of all technical documentation to meet the contract schedule from project hand over by the Tendering Team until take over by the Client/Service Department and/or O&M Organisation. n Supporting the project team in discussions/submissions to the client and relevant authorities and responsibility for the relevant as-built documentation. n The Product Engineer shall support the site construction and commissioning staff, in particular in the close-out punch lists to obtain PAC and FAC with the Customers, and ensures experience feed-back from the projects. n Further the Product Engineer Boilers shall support on request the Tender Department and the Plant Integration & Optimisation Department. Requirements: n The candidate shall have as a Minimum a degree in engineering n The candidate shall have at least 5 years experience in the field in power station engineering n The candidate shall have the competences to specify the system/components necessary for the Boiler systems n The candidate shall be a good team player and shall have some minimum managerial skills in order to be able to plan well, coordinate with projects team members, guide the sub supplier through the projects and take care of his/her functional interfaces clarification. n Open-minded, flexible, creative, intellectually alert. Job Location: n The position will be based in 2.电厂设计－项目工程经理－电厂业务Project Engineering Manager The PEM has overall technical leadership and enforces timely issuance of technical Documentation for the project. He is responsible for technical interpretation of the contract (support and clarification with Customer) and supports the Project Director in any technical matter of the Project. Responsibilities: n Support the Project Director in defining strategies for contract fulfillment (e.g. heat rate, output, noise émissions, etc…). n Finalizes selection of suppliers together with the Project Director, Procurement and Logistic PM and Engineering (This is taken over by the Project Manager of the Balance of Plant, if one is nominated by the Project Director). n Responsible to enforce the fulfillment of the technical contractual requirements, including the project requirements for documentation considering commitments to the Customer, site and the Partners. n Manage the Take-over of the Project Engineering from the offer-team. Manage the review and improvement of the accuracy and consistency of data. n Manage the Project Engineering team, that the design is according to the applicable rules, regulations codes and standards and according to good engineering practice, especially with regard to Environmental aspects and Health & Safety of Site Personal, Operators, Maintenance personnel and third parties. n Responsible for design freeze activity program and follow-up. n Control the design review program and follow-up. n Control the design change requests. n Responsible for technical risk assessment and corresponding risk reviews. n Responsible to optimize technical solutions, budgets and project schedule. n Assess, approve, and expedite technical aspects of change orders. n Responsible for the Plant Engineering budget including cost of subcontracted equipment and design services. n Compile and check the project engineering file (PEF) and provide input to the project management file (PMF). n Responsible to solve open technical issues between the Partners in the best interests of the project. n Provide support for technical issues linked to overall time schedule problems and define appropriate activities for a recovery plan. n Responsible for project technical coordination, follow-up of technical issues of MoM’s and agreements between the Partners, Participants and the Customer as well as technical Consultants, Authorities, etc… n Clarify and support site in all technical issues and coordinate with the respective Lead Engineers and Project Managers as nominated. n Support the project management (provide evidence) to get milestone payments achieved. n Ensure timely response on technical issues to the Customer or his Representative. Compile open issues and maintain comment list accordingly. n Release the submission of engineering documents to Customer. n Ensure proper rollout and application of EPC and Engineering Tools. n Ensure that the overall performance test procedures are in the line with the project strategy. n Provide technical support to the claim management. n Coordinate the project documentation for hand-over to Customer Service. n Report the project status according to the established requirements. n Additional tasks & responsibilities are also defined in the Plant Business process maps and related instructions. n To resolve technical disputes, deadlocks or implement improvements by directing relevant parties, subject to later dispute resolution process in accordance with the relevant directives. n Approval of engineering documentation according to the relevant directive. n Right to communicate directly with Customers, Partners and Participants on technical matters. n To obtain technical support from experts, specialists and special functions. n To access to all information relevant to the project. n Right to obtain on-time decisions from the Project Director. Requirements: n Master degree in an Engineering discipline. n At least 5 years professional experience in Project Engineering or Power Plant Engineering. n At least 5 years of experience in a management function or an Education and Experience assessed to be equivalent to the above. n Good knowledge in the faculties of GT, ST, Boilers and in I&C disciplines. n Detailed knowledge in the activity of water/steam cycle, BOP, arrangement, piping and valves, electrical, civil and construction engineering. n At least one month site experience. n Is able to communicate fluent in English (written and spoken). n Good knowledge of the processes in Engineering and its interfaces, particularly procurement processes and construction processes. n Good knowledge of Engineering and Project Management tools. n “Customer Focus” minded. n Able to motivate people, to encourage creativity and create team spirit; good coaching skills. Job Location: n The position will be based in 3.电厂设计－工艺工程师－电厂业务Process Engineer Responsibilities: n The Process Engineer has the responsibility of the on time delivery of the project process engineering documentation (mainly P&ID’s, system descriptions, signal exchange lists, analogue and logic diagrams, mechanical interfaces lists, electrical consumers list, and operating instructions) according to the valid work instructions, with respect to the project and contractual requirements, and Alstom Plant EHS Policy, with technical support from the Process Lead Engineer and Process Expert. n He/She also ensures the follow-up of calculation notes and heat balances, analyses and comments for the electrical and control parts of equipment documentation, takes care of as-built documentation, supports the site construction and commissioning staff, in particular in the close-out punch lists to obtain PAC and FAC with the Customers, and ensures experience feed-back from the projects. n He/She ensures a good communication within the Team. n The Process Engineer has the technical and time schedule responsibility for the engineering work and/or services assigned to him/her by the Process Lead Engineer. n He/She provides inputs for the preparation of system time schedule and process engineering progress upon request by the Process Lead Engineer. n Further the Process Engineer shall support on request the Tender Department and the Plant Integration & Optimisation Department. Requirements: n The candidate shall have as a Minimum an Engineering degree appropriate to the technical field involved and at least 5 years of relevant experience. n The candidate shall have the competences for Water and Steam Cycle and Rest of Plant systems “basic” calculations and sizing of components, piping, instrumentation and control. n Computer familiarity (Word, Excel, Lotus Notes…) n English- good standard in reading, writing and spoken. n The candidate shall be a good team player and shall have some minimum managerial skills in order to be able to plan well, coordinate projects team members working under his functional responsibility (calculations, P&ID’s, overall operation), and take care of his/her functional interfaces clarification. n Open-minded, flexible, creative, intellectually alert. Job Location: n The position will be based in 4.电厂设计－初级工艺工程师－电厂业务Junior Process Engineer Responsibilities: n The Junior Process Engineer has the responsibility of the on time delivery of the project process engineering documentation (mainly P&ID’s, system descriptions, signal exchange lists, analogue and logic diagrams, mechanical interfaces lists, electrical consumers list, and operating instructions) according to the valid work instructions, with respect to the project and contractual requirements, and Alstom Plant EHS Policy, with technical support from the Process Lead Engineer and Process Expert. n He/She also ensures the follow-up of calculation notes and heat balances, analyses and comments for the electrical and control parts of equipment documentation, takes care of as-built documentation, supports the site construction and commissioning staff, in particular in the close-out punch lists to obtain PAC and FAC with the Customers, and ensures experience feed-back from the projects. n He/She ensures a good communication within the Team. n The Process Engineer has the technical and time schedule responsibility for the engineering work and/or services assigned to him/her by the Process Lead Engineer. n He/She provides inputs for the preparation of system time schedule and process engineering progress upon request by the Process Lead Engineer. n Further the Process Engineer shall support on request the Tender Department and the Plant Integration & Optimisation Department. Requirements: n The candidate shall have as a minimum an Engineering degree appropriate to the technical field involved, or 5 years of relevant experience. n This job is open for a beginner with an appropriate Engineering degree, or after a first experience in the same field. n The candidate shall have the competences for Water and Steam Cycle and Rest of Plant systems “basic” calculations and sizing of components, piping, instrumentation and control. n Computer familiarity (Word, Excel, Lotus Notes…) n English- good standard in reading, writing and spoken. n The candidate shall be a good team player and shall have some minimum managerial skills in order to be able to plan well, coordinate projects team members working under his functional responsibility (calculations, P&ID’s, overall operation), and take care of his/her functional interfaces clarification. n Open-minded, flexible, creative, intellectually alert. Job Location: n The position will be based in 5.质量管理－QA/ EHS 经理－电厂业务 Responsibilities: QA Part n Management Representative of the Company’s Quality Management System. n Reporting to the management leadership on the current quality management issues in management reviews and conducting the performance of corrective actions thereof. n Defining quality objectives and targets in the yearly management reviews and reporting on their level of fulfillment in the context of the global organization. n Arranging and monitoring the management system certification procedure by external certification companies as applicable for the Unit. n Ensuring implementation, effectiveness, maintenance and continual improvement of the Company’s Quality Management System. n Continual maintenance, review and improvement of the company’s Quality Policy. n Ensuring continuous maintenance of quality culture, as well as of continuous awareness of customer requirements throughout the company. n Provide quality service to all functions on an as needed basis. n Ensuring continual improvement of processes and their interfaces regarding their compliance with the requirements of the ISO 9001:2000, ISO 14001 and OHSAS 18001 standard. n Planning, performing and managing internal audits, together with the Functional Quality Managers, including follow-up on closeout of Corrective Actions (CARs). n Ensure by whatever means that process modifications and updates are trained and report back successful completion. n Initializing and monitoring of training of internal auditors. n Ensuring continual compliance with the ISO 9001:2000, ISO 14001, OHSAS 18001 and ISO 7200 documentation requirements, in cooperation with other Functional Quality Managers regarding preparation, control and archiving of documents (directives, procedures, work instructions and other related documentation). EHS Part n Ensure that latest update of EHS Policy is prominently displayed in the local office (translated where necessary) n Ensure awareness of all employees (management included) on their operational EHS responsibilities, and on their legal EHS responsibilities according to the local requirements n Support the local management (at all levels) to fulfill their functional and legal EHS responsibilities n Prepare, update and review local office specific EHS plan. n Prepare, update and review local office risk assessment. n Implement changes to processes or documentation and ensure relevant person are made aware. n Ensure employees are aware of the EHS Management System by reminding regularly the EHS issues in the different activities carried out in the local office n Be an communicative interface between Plant Business EHS Head Office and local offices n Local deployment of global training programs n Provide feedback from local experience n Inform Plant Business EHS Head Office on serious accident happening within the office n Ensure compliance with and survey of the legal requirements for the office n Ensure that EHS topics are included in internal audits n Support the audits carried out by external organization / agencies for certification / compliance with local requirement. n Additional tasks & responsibilities are also defined in the Plant Business process maps and related instructions. Requirements: n Technical education of university degree level. n Degree in Quality Management or broad experience in quality management. n Professional experience in quality management in the power or related industry. n Fluent in English (written and spoken). Further languages are of advantage. n High awareness and commitment to a company’s Quality policy, strategies and objectives. n Ability of solving complex problems by means of systematic solutions. n Excellent communication and inter-personal skills. Job Location: n The position will be based in 6.采购－大宗商品采购经理－电厂业务Regional Commodity Manager Responsibilities: n Plays a key role within Low Cost Sourcing (LCS) Centers of the Plant Business processes to improve the sourcing performance and therefore to meet the Sector performance targets. n Supports and organizes activities to execute the sourcing strategy for a given supply market and/or commodities by means of following competencies: n Supports the business needs of the KCMs for his supply market after having lead the appropriate market research action, n Manages the supplier qualification process and involve the other parties (quality, engineering, project purchasing, logistics etc.) according to the supplier qualification procedure n Is responsible to provide systematic and regular feedback to the KCMs on progress and issues for the LCS activities, n Supports supplier visits by the KCMs to the region for supplier qualification and related n businesses, n Supports Power Source Tool initiatives by the KCMs. n During tendering phase, the role of the RCM is to expand the use of regional low cost equipment suppliers to maximize our tender competitiveness. n Hence, under the direction of the KCM, the RCM: n Issues enquiries to regional suppliers, conduct preliminary evaluation of the offers and advise the KCM of the outcomes n Handles tender queries or tender clarification questions n Proposes and compile draft Tender Supplier List for further processing by KCM / Supplier n Administration Manager n Conducts supplier qualification for suppliers invited for tender but not yet qualified in Supplier Assessment and Monitoring (SAM) database. n Provides feedback to KCM on other information (e.g. site visit), market intelligence, etc. which would have a |